Glass Staircase Balustrades
Swapping a timber spindle banister for a glass staircase balustrade is the job we are asked for most often. It changes a hallway more than any other work of comparable cost, because the light stops being blocked halfway up the stairs. We survey, make and fit across Yorkshire and the North East with our own team.
Book a free survey and we will quote in writing, with no obligation.
Replacing spindles with glass
Most jobs start with a staircase that is structurally fine and visually dated. The treads and the strings stay. The spindles come out, the handrail is reused, replaced or removed depending on the look you want, and glass goes in between. Because the stairs themselves are untouched, the work is usually done in a day with no building work to make good afterwards.
Raked glass, stepped glass, or both
On the flight itself the glass can follow the rake of the stairs as a single sloping run, which is the cleanest look and the one most people picture. The alternative is stepped glass, where each panel sits level and the run climbs in stages. Stepped suits some period properties and often works out cheaper, since the panels are simpler shapes. Landings almost always take level panels, so a staircase with a half landing usually ends up as a mix of the two.
Oak and glass together
Oak and glass stairs are the most requested combination we fit. A solid oak handrail and newel posts with glass infill keeps the warmth of timber at the places you actually touch, while the panels below do the work of letting light through. We match new oak to existing where the rest of the joinery is staying, or supply the whole balustrade in matched timber if the staircase is being reworked properly.
Fixing to the string, the newels and the landing
A staircase balustrade fixes into the string along the flight and into the newel posts at the ends, and those two behave differently. Strings are usually softwood with a hardwood facing, so the fixing has to reach something solid rather than biting into a veneer. Newels carry most of the load at the top and bottom of a flight and are occasionally found to be loose before we start, which gets dealt with first. Landings are more forgiving, with a joist underneath that can usually take a channel or a set of clamps directly.
Frameless, clamped or channel
Clamped glass uses individual stainless fittings bolted through the string, and it is the usual choice on a staircase because it copes with a raked run and an uneven timber surface. A base channel gives a cleaner line and suits a landing or a straight flight with a level, solid fixing surface. Fully frameless, with no handrail at all, is possible on a staircase where the span and the regulations allow it. We go through all three at survey and show you what each will look like on your stairs.
Handrails and the regulations
A staircase in a home has to have a handrail at a set height, and guarding that resists a given load without gaps a small child could pass through. That is why a glass staircase balustrade is normally designed with the handrail retained or replaced rather than removed altogether. We confirm what applies to your stairs at survey and supply the calculations with the quote.
Children, pets and stair gates
Glass is a good surface for a stair gate, because there are no spindles for a gate to be strapped around and the pressure fittings sit flat against it. We can supply gate posts fitted into the run where you know in advance that a gate is going on. Worth mentioning at survey, since it is far easier to allow for than to add afterwards.
What a glass stairs balustrade costs
Flight length matters, though less than people assume. What moves a price is the number of returns and landings, whether the handrail and newels are being replaced or kept, whether the glass is raked or stepped, and what condition the staircase turns out to be in once the spindles come out. We survey first and quote in writing.
Why people choose us
- Surveyed, made and fitted by our own team, with no subcontracted installation
- Most domestic flights completed in a day
- Structural calculations supplied with the quote
- Oak matched to existing joinery where it is staying
- Family run, with over twenty years in glass and glazing
See before and after work on our before and after page and in the staircase gallery. There is more on glass and feature staircases, staircase renovation, frameless balustrades and glass balustrades.
Frequently asked questions
Can you fit glass without replacing the whole staircase?
Yes, and that is most of what we do. The treads, risers and strings stay where they are. Only the spindles and, if you want, the handrail and newel caps change.
Will it make the stairs feel less safe?
No. The glass is toughened and laminated, the fixings are engineered for the load, and the finished balustrade is considerably more solid than a run of loose timber spindles. People are often surprised how rigid it feels.
Do I have to keep the handrail?
On a domestic staircase a handrail is normally required, so the usual answer is yes, though it can be a slim oak or stainless rail bonded to the glass rather than the chunky timber one you have now. We confirm what applies to your stairs.
Does it show fingerprints?
Less than people expect on a vertical pane. A glass cleaner every few weeks keeps it looking right, which is a good deal less work than dusting and repainting spindles.
How long does it take?
A straight domestic flight is normally a day on site once the glass is made. Staircases with several landings or returns take longer, and we give you the time in writing with the quote.

Glass Supply & Installation Specialists
A professional team of experts providing glass and glazing solutions covering the whole of Yorkshire & more...
Whether it's Birmingham, Hull, Liverpool, Machester, Newcastle or Nottingham, get in touch to find out how we can help you with your bespoke glass project.