Glass Juliet Balconies

We make and fit glass Juliet balconies across Yorkshire and the North East. Every one is measured on site, made to the opening rather than cut down from a stock size, and fitted by our own team with the structural calculations supplied.

Book a free survey and we will quote in writing, with no obligation.

What a Juliet balcony is

A Juliet balcony is a barrier fitted across a set of doors or a full height window at first floor level or above. There is no platform to walk out onto. The doors open inwards or fold back, the barrier stops anyone falling, and the room gets the light and the open air of a balcony without the structure and the cost of building one. In glass it does that job while leaving the view alone.

Sizes, and why we measure on site

Most Juliet balconies sit somewhere between 1.2 and 2.4 metres wide, because that is the range most French door and bifold openings fall into. The number that matters is the structural opening, taken at several points, because brickwork is rarely as square as the drawings suggest. A difference of 10mm across the width changes how the end fixings land. We measure after the doors are in, or we work from the door schedule if the opening is still being built.

Height and the regulations

Guarding at a first floor opening has to meet the height and loading set out in the building regulations, which for a barrier of this kind is generally measured from finished floor level inside the room. The exact figure depends on the height of the drop and how the opening is used, so we confirm what applies to your job at survey and supply calculations showing the barrier meets it. Builders and building control officers ask for those, and a supplier who cannot produce them is a problem later.

Fixing to your wall

This is where most of the engineering sits, and it changes completely with what you are fixing into. Solid brick takes resin anchors into the brick itself rather than the perpend joints. Stone wants careful setting out so the fixings miss the bed joints. Timber frame needs the load carried back to a structural stud or a noggin fitted behind the sheathing, which sometimes means opening up the reveal. Rendered and insulated walls are the awkward ones, because the fixing has to pass through the insulation and reach the structure behind without crushing it, and a thermal break is often wanted at the same time. We work this out at survey, and it is the main reason a site visit beats an online order form.

Frameless, part framed or posted

A frameless Juliet is a single pane with discreet side fixings and nothing across the top, which gives the clearest view and the cleanest look. A part framed version adds a slim top rail, useful where the span is wide or where a handrail is wanted. A posted system uses uprights at each end with glass infill, which costs less and suits a property where heavy hardware looks right. All three use the same grade of glass.

Which doors it suits

French doors are the usual pairing and the simplest. Inward opening doors work well, since nothing swings into the barrier. Bifolds that fold inward are fine, and outward folding bifolds need the barrier set to clear the panels, which affects the fixing positions. Sliding doors are straightforward. Tilt and turn windows can take a Juliet too, which is a common way of opening up a bedroom without altering the opening itself.

The glass

Toughened and laminated, in a thickness worked out from the span and the loading. The laminate interlayer holds the pane together in the opening if it is ever broken, which matters a great deal more at first floor level than it does on an internal landing. Clear is the usual choice. Tinted, satin and low iron glass are all available if there is a reason for them, such as overlooking a neighbour.

Does it need planning permission?

Usually no, when it replaces an existing window or sits within existing doors on a house. Flats, listed buildings and conservation areas are different, and an opening that is being enlarged is a separate question from the barrier that goes across it. Building regulations apply either way, whatever the planning position. If you are unsure, your local authority will confirm it faster than any supplier can.

What a glass Juliet balcony costs

Width is the obvious variable. The ones that move a price more than people expect are the wall construction, whether scaffold or a platform is needed to fit it safely, and whether the finish has to match existing hardware. We survey, then quote in writing with the calculations attached, because a figure given before anyone has seen the wall is a guess.

Why people choose us

  • Made to your measured opening, never cut down from a stock size
  • Surveyed, made and fitted by our own team, with no subcontracted installation
  • Structural calculations supplied with the quote
  • Toughened laminated glass as standard
  • Family run, with over twenty years in glass and glazing

See finished work in our project gallery. There is more on our glass balconies, frameless balustrades, glass balustrades and outdoor and decking balustrades.

Frequently asked questions

How wide can a Juliet balcony be?

Wider than most openings need. The limit comes from the glass thickness and the fixing method rather than a fixed number, and spans beyond about 2.4 metres usually want either thicker glass or a top rail. We size it from the opening.

Can it be fitted to a timber framed house?

Yes, though the fixings have to reach a structural stud or a noggin fitted behind the sheathing rather than relying on the board. That occasionally means opening up the reveal, which we would flag at survey and price in.

Will it be fitted inside or outside the opening?

Either. Face fixed outside the reveal is the most common and the most forgiving of an out of square opening. Reveal fixed inside gives a neater line where the brickwork allows it. We will tell you which suits your opening.

Can you match existing hardware?

Usually. Stainless, black, anthracite grey and white are all standard, and we can match a RAL colour if the doors and windows are a specific shade.

How long does fitting take?

A single Juliet balcony is normally a couple of hours once the glass is made, assuming safe access. Anything needing scaffold takes longer and we say so at the quoting stage.

Showroom

Glass Supply & Installation Specialists

A professional team of experts providing glass and glazing solutions covering the whole of Yorkshire & more...

Whether it's Birmingham, Hull, Liverpool, Machester, Newcastle or Nottingham, get in touch to find out how we can help you with your bespoke glass project.
 

Contact Us